Adaptation Actions
- (x) Remove Damage to infrastructure (roads, water tanks/storage facilities- wooden tanks etc filter Damage to infrastructure (roads, water tanks/storage facilities- wooden tanks etc
- (x) Remove Water sources are destroyed directly filter Water sources are destroyed directly
1 - 19 of 19
55 - Thoroughly inspect all bullock fencing before a cyclone to cut out any living branches on posts (i.e. purao fences)
56 - Avoid corrosive fencing materials (i.e. barb wire)
57 - Allow glycine to grow over barbed wire fences to provide a physical barrier to salt exposure
80 - User change technical designs of sources to be cyclone proofed
81 - Ensure that tank catchment roofs are securely fastened before a storm
82 - Small dams & spring boxes may be used so the source itself is not buried
83 - Adjust the design of the intake box
84 - Promote underground tanks that are not susceptible to winds
85 - Use strong ferro cement tanks that will not move in wind
86 - Do not use light plastic polytanks in cyclone exposed areas
87 - Keep water source areas cleared, cut old branches and remove possible debris to protect infrastructure
88 - Build sea walls/other barriers around exposed coastal spring sources
367 - Ensure proper drainage: outflow needs direction away from infrastructures and towards a safer place
368 - Check that hand pumps are properly sealed (at top of bore hole) to prevent contamination and back leakage
369 - Fully check the performance of new systems 3 months – 1 yr after construction
370 - Build homes with cement around the base so as to prevent inundation
371 - Build homes that are raised above ground level to prevent household inundation during floods
372 - Build walls and sea walls to prevent storm surge related flooding
373 - Develop health guidelines on consumption and contamination by air pollution and ash